News


Want to Save $456.88 on your production costs?

May 11, 2016 Kevin Serrato

Want to Save $456.88 on your production costs?

  Our diamond core bits are the best in the world! Not only do they cut clean precise holes in almost any type of gemstone, but they can save you tons of money on your production costs. Let’s do some math. If you buy a cheap coated diamond drill bit for $5.00, you will be lucky to get 5 holes drilled before the drill bit is no good. However, if you buy one of our drill bits, which costs $43.12 (cost of our 2.5mm bit), you will get between 500 holes and 800 holes before you have to replace the...


Our Diamond Drill Bits Are The BEST…and here’s why

May 03, 2016 Kevin Serrato

Our Diamond Drill Bits Are The BEST…and here’s why

Most sintered bits are made by melting aluminum and diamonds in a cast. We use a galvanic process to pull metal over a diamond matrix, resulting in a higher concentration of diamond. You can get 500 to 800 holes per bit depending on what your cutting.

Multidrill Unboxing and Setup Video

May 03, 2016 Kevin Serrato

Multidrill Unboxing and Setup Video

Check out our Multidrill Drilling System. In this video, we will explain everything you will receive with your Multidrill Drilling System order and simply instructions on how to do your setup. Call Kevin if you have any questions at (520) 314-9809 and check out our other videos for information on all our products.